DFS is a more economical digital force tester but thus‚ provide a and are available for all testing requirements‚ with capacities starting from 5 N to 2‚500 N (0.5 to 250 Kg‚ 1.1 to 550 lbs). The DFS offers a far more functionality within its price range‚ with an accuracy of ±0.2%‚ and a lot of more features.

DFT offers a wide range of digital force tester and are available for all testing requirements‚ with capacities starting from 5 N to 2‚500 N (0.5 to 250 Kg‚ 1.1 to 550 lbs). With an accuracy of ±0.1%‚ DFT also has database‚ statistics‚ date/time‚ pass/fail‚ reverse display and backlight.

SMD 1KN Digital Motorized Test Stand is a motorized test stand controlled by a single ballscrew-driven with a load rating of up to 1000N (220lbs)‚ both upward and downward movement can be adjusted at multiple speeds. Together with our DFS and DFT force gauges and necessary accessories by NEXTECH®‚ the SMD 1KN completes a force measurement system for accurately and efficiently testing a wide range of products.

NEXTECH® DTT torque tester is designed for setting‚ testing‚ calibrating‚ heavy duty equipments accurately and efficiently. They can be used with manual or power tools. Rundown adapters are provided for use with power tools.

NEXTECH® DTX torque tester has a uniquely designed for force and torque measurement. They are ideal for the operations that require wide force and torque range since the transducer is interchangeable. The transducer is smart sensor with built in electronics that store calibration data‚ and information for automatic recognition by tester. The transducer is ready to use within seconds‚ once connected and power on. Any single tester can do calibration of each transducers and the information are store permanently in the transducer‚ until the next calibration.

NEX-DATA is a utility software program provided by NEXTECH® for DFT force gauges. Nex-Data collects‚ analyzes and manages data. It is designed for comparing similar characteristics.

MEM-LOADER is a dedicated software for transfer of data from tester to PC via RS-232 interface cable is provided with all units. The Software is easy to use.

Couple fittings directly to the load cell stem or use an extension rod. The threads are 10-32 in capacities up to 1000 N‚ and 5/16-18 in the 2500 N capacity.

DTT Accessories

Download Brochures, Spec Sheets, and Manuals.