Fitting Accessories
Couple fittings directly to the load cell stem or use an extension rod. The threads are 10-32 in capacities up to 1000 N, and 5/16-18 in the 2500 N capacity. Ensure that fixturing does nor contact the force tester case. Ensure that anything coupled to the tester is screwed finger-tight only. Excessive torque can damage the load cell and is not covered by warranty.

Mounting to a Fixture or Test Stand
The two 10-32 threaded holes on the rear of the tester can be used for mounting the tester. The distance between the holes is 2.5 inch. A versatile stand mounting plate is available to couple the force tester to many brands of test stands.