 |
| |
|
|
|
|
|
|
|
|
 |
|
|
|
|
| |
 |
|
|
|
|
|
|
|
|
|
|
NEXTECH® DTX
system consist of monitor and external transducers. More
than one transducer can be connected together at same time. They are ideal for the operations that require wide force and torque range,
and at the same time. There iis no need to disconnected or select
the transducers since all is done by software. The transducer
is smart sensor with built in electronics that store calibration
data, and information for automatic recognition by tester. All
transducers are ready to use within seconds, once connected and power on. Any single tester can do calibration of each transducers and the information are store permanently in the transducer, until the next calibration. |
|
Features:
- Smart Transducer technology; No setup required when connecting
- Transducer can be connect remotely through cable
- Thermal printer supported, with easy direct connection and held by screw, or remotely by cable
-
The tester, transducer and printer are separate units. They can be purchased separately, or as a set
-
Printer can be programmed to print automatically on every Peak value reached. It can also print from data saved in the memory of the tester
-
Transducer accuracy is 1% of reading
(20%-100% of FS)
-
Accurate reading of actual dynamic torque for high RPM tools using sampling and software algorithm technique
- Auto-Zero with software assistance
- Reading in Peak hold, First peak and Track mode
- Total 9 units display, with default mode settable
- LCD display reading with auto-lit backlight.
- Support PC communication program “TorqueMonitor” and “MemLoader”
Note: Other capacity and better accuracy available on request.
***Force transducers will be released in the near future*** |
|
| |
|
| |
|
|
|
Model DTX Capacity and Divisions: |
|
|
|
|
|
|
|
| Model No: |
|
|
|
Model No: |
|
|
|
| DTX 050 |
50 Kgf.cm |
(43.40 lb.in) |
(4.90 N.m) |
DTX 1000 |
1000 Kgf.cm |
|
|
| DTX 100 |
100 Kgf.cm |
(86.80 lb.in) |
(9.80 N.m) |
DTX 2000 |
2000 Kgf.cm |
|
|
| DTX 200 |
200 Kgf.cm |
|
|
DTX 4000 |
4000 Kgf.cm |
|
|
| DTX 500 |
500 Kgf.cm |
|
|
DTX
8000 |
8000 Kgf.cm |
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
