 |
| |
|
|
|
|
|
|
 |
|
|
|
|
| |
|
|
|
 |
|
|
|
|
|
|
NEX-DATA
is a utility software program provided by NEXTECH® for DFT force
gauges. Nex-Data collects, analyzes and manages data. It is designed
for comparing similar characteristics, such as maximum force, from
a batch of tests. Nex-Data also accepts the memory dumps from the
DFT internal database.
- Requires little set up – only the COM port
- Date/Time of each reading
- General Statistics
- Pass/Fail
- One button export to Excel
|
| |
User Interface
|
System Requirements
|
|
| |
 |
A desktop PC or a laptop computer
with
- Intel Pentium, AMD, Celeron Processor
- 20 MB of available hard-disk space
-
Minimum Microsoft Windows 98 SE (or later
versions) installed
- 64-128 MB RAM (Windows 98 SE)
- 128-256 MB RAM (Windows 2000 or Win XP)
- CD ROM drive
-
Suitable serial port (COM1, COM2, etc,) must
be available to connect
- Serial cable provided by Nextech for connection
|
|
| |
In the statistical calculations, the ease of the software allows
the user to set the lower and upper limits of the product to be
tested and also the Calculation Unit to be used. The results calculated
indicate the Maximum, Minimum, Mean, Standard Deviation and Coefficient
Variance.
According to the lower and upper limits set, the Nex-Data software
will calculate the number of units that will pass the test, the
number of units failed and their percentages respectively. Statistical
analysis and calculations of up to 200 records reading at a time
can be done. |
|
|
|
